Opengear - Console Server
ACM7000 Resilience Gateway
Ensure uptime at branch offices and remote sites
and remediate issues at the network edge..
ACM7000 Resilience Gateway
The Opengear Resilience Gateway ensures uptime at branch offices, retail stores, kiosks and other remote sites. Identify and remediate issues at the network edge before they become failures with SmartOOB™. Maximize WAN resilience with Failover to Cellular™ to 4G LTE networks and built-in multicarrier capabilities.
Features
In-Band Management
A method of accessing (network firewalls, routers, switches, servers, storage, CCTV, desktops or any IP configured device) by security technicians to configure and manage these devices through your regular network connection such as LAN or WAN.A method of accessing (network firewalls, routers, switches, servers, storage, CCTV, desktops or any IP configured device) by security technicians to configure and manage these devices through your regular network connection such as LAN or WAN.
When your network is down or severely degraded, in-band management however could be of a little help, and you, as an administrator, might have no other choice but make a trip to you data center, unless there is an out-of-band network that has been previously setup
Features
Out-of-Band Management
A method of accessing (network firewalls, routers, switches, servers, storage, CCTV, desktops or any IP configured device) by security technicians to configure and manage these devices through your non regular network connection such as Cellular (LTE or 4G or 3G) or legacy dial-up modems (V-92).
Features
Localized Environmental Monitoring (Sensors)
Environmental monitoring sensors can be supplied and connected directly to each rack and connect them with Console Access Server for localized rack environmental monitoring and get direct alerts via SMS, Email or on Dashboard. Add another layer of localized rack environment monitoring at minimal cost:
- 1. Humidity Sensor
- 2. Heat Sensor
- 3. Rack Door Open/Close Sensor
- 4. Water Leakage Sensor
- 5. Smoke Alarm Sensor
- 6. Window Vibration Sensor
- 7. Motion Sensor
Vendor Independent
OpenGear delivers a vendor independent solution for monitoring and controlling the infrastructure in your data center or remote site by supporting the widest array of network, IT and power infrastructure and vendors. Network, telephony, server, storage, power.
LDAP and rest of protocols
Supports Authentication protocols such as Kerberos, LDAPS, TACACS+, RADIUS, and RSA Two Factor Authentication
SMS Triggered 4G connection
The device is capable of accepting SMS through the 4G SIM which is already installed in all the units for out-of-band access. This feature is functional through customized scripts. Opengear units will perform specific actions based on the SMS received with pre-defined codes by customer. You can control SMS 4G trigger via specific source number or numbers.
Dual LTE/4G/3G Built-In Modems
No need to connect 4G/3G USB Dongles. Selected models have built-in Single or Dual cellular modems for either Out-Of-Band Management or to transmit regular data traffic as backup lin
Centralized Management & Monitoring
Centralized Management Server can manage & monitor up to 5,000 Console Access Server from single centralized location with centralized authentication, authorization and logging.
Key Logger
logs all the key strokes of a user when accessing the device for console access
Dual Power Supplies (AC / DC)
Selected Data Center units comes with dual power supplies. Both AC and DC power supplies are supported.
Web Terminal Access
he Console Access Server provides the access to all the devices connected to it via web based terminal access, helping connect via any device iPads & Mobile devices providing user friendliness and ease of access to the administrators.
Port Cascading
The feature allows one of the Console Switches to act as a master and the rest of the servers connected to the master act as slaves helping in managing and monitoring the servers from a single point.
Zero Touch Provisioning
Zero Touch Provisioning feature allows the administrators with the ease of a plug and play alike feature where new devices could be configured at basic level via a wizard.
Built-in Firewall
The Opengear appliances has a linux based built-in firewall.
Access Methods
The console appliances can be accessed via SDT connectors, Secure CRT and putty like software. Directly access serial ports over the GUI interface of Console Switch via Web Terminal SDT Connector can be used to access the devices connected serially to Console Switch as well as network host added to Opengear Console Switch • Serial ports can also be accessed over Putty or SecureSRT or SSHTerm
Sameday Hardware Replacement
UAE based GCC depo/stocking for sameday Hardware replacement along with providing 24*7 support to the GCC customers.
Military Grade Encryption
Opengear’s FIPS 140 -2 validated secure in-band and out-of-band management solutions ensure that IT and network services are always available, improving efficiencies and maximizing uptime.
RSA Two Factor Authentication
To provide authentication and hardening the security with Two Factor for Centralized Management Server Login.
Smart PDU & UPS Support
Authorized users have secure outlet control to power on, power off, and power cycle at the managed device level. Power metering and temperature monitoring are coupled with logging and alerts. And with auto-response, power issues can be automatically detected and remediated — before they become problems.
Built-in GPS Receiver
For your remote locations or mobile remote locations selected models has built-in GPS receiver
Authentication & Authorization
Configure each console port on the Console Access Server for authentication and authorization based on users and groups and add another layer of security and accountability in your network..
Customized Alerts via SMS / Email
Other than built in alerts and notifications, AMT team can script any form of alerts required to achieve business objective and deliver it via SMS or Emai
Fiber SFP
Data Center Units supports up to 40KM range fiber SFP
Syslog/SNMP Support
Alerts and traps generated can be sent across to a centralized logging servers including Syslog & SNMP
VPN Support with CMS (OpenVPN , IPSec , PPTP)
The devices have support for OpenVPN,PPTP & IPSec through which the communication between the central management server and the Console Switchs in encrypted and secured.
Bulk Provisioning
The devices have support for OpenVPN,PPTP & IPSec through which the communication between the central management server and the Console Switchs in encrypted and secured.
Built-in TFTP & FTP Server
The appliances come with built-in TFTP and FTP servers for storage of the configuration files and the IOS which comes in handy for bulk provisioning
DynDNS Support
With the feature of the DynDNS the appliances can be published and accessed from anywhere after providing authorization credentials.
Refer to the specific product pages for details on:
- Emissions and Immunity (FCC, ICES, CISPR22, EN55022/24, IEC61000)
- Cellular certification (PTCRB, NAPRD, GCF-CC, R&TTE, EN 301, A-Tick, TIA/EIA-690/98)
- Other agency approvals (CE, UL 1950, TUV, C-Tick)
Regulatory Compliance (Environmental, Export & Standards)
The product has extensive product compliance, environmental policies and technical partner certifications:
- REACH Compliance
- ROHS Statement
- NERC Compliance
- WEEE
- Conflict Minerals Policy
- Product CCATS#, ECCN, US HTS and Export License
- PCI DSS Compliance
- FIPS Security Standard
- RSA SecurID
- TAA Compliance
Customized Triggers, Alerts & Remediation Response:
All Console Switches supports Auto-Response feature.
Alert Condition:
The facility monitors nominated designated ports, devices and states and probes for alert Check Conditions
Trigger Action:
In response to an alert trigger the Console Switch then initiates a sequence of Trigger Actions
Remediation:
The facility then checks for resolution and initiates Resolve Action (e.g. send notifications of problem Remediation)
Few Alert Triggers:
- UPS-Power-Supply-Checks (load, input voltage etc triggers)
- Battery-Checks (on battery and battery low triggers)
- Serial-Checks (serial port/console login, pattern match or control line trigger )
- Custom Script Check will run a nominated custom script with arguments whose return value is trigger
- Alarms/Digital Inputs (door open, smoke, vibration, water leakage trigger, heat & Humidity)
- ICMP Ping (use a ping result as the trigger event)
- Cellular Data (monitors the aggregate data traffic inbound and outbound through the cellular modem as a trigger)
- Setting an incoming SMS-Command from a nominated caller as the trigger